C&G 2365​

Level 3 Diploma in Electrical Installations

City & Guilds 2365 – Level 3 Diploma in Electrical Installations (Buildings and Structures)

The Level 3 Electrical Installations Diploma is aimed at those who have already completed the C&G 2365 Level 2 Diploma, or have sufficient current relevant experience and knowledge of the industry.

This qualification does not make candidates fully qualified electricians but allows them to learn, develop and practise the skills required for employment and/or career progression in the electrotechnology sector.

Successful completion of this qualification will provide you with the practical skills and knowledge and a firm foundation to progress further and ultimately onto a qualification such as the Level 3 NVQ Diploma in Electrotechnical Technology (2357) which can lead to becoming a fully qualified electrician.

C&G 2365 Level 3 Diploma Learning Units

There are six subject units within the 2365 Level 3 Diploma:

  • Unit 301: Understand the Fundamental Principles and Requirements of the Environmental Technology Systems
  • Unit 302: Principles of Electrical Science
  • Unit 303: Electrical Installations: Fault Diagnosis and Rectification
  • Unit 304: Electrical Installations: Inspection, Testing, and Commissioning
  • Unit 305: Electrical Systems Design
  • Unit 308: Career Awareness in Building Services Engineering
C&G 2365 Full Online Course + City & Guilds Registration – £1900 + VAT 
– or 10 x Monthly Payments of £190 + VAT

 

The course is accessible for 12 months from the day of purchase.

Buy The C&G 2365 Level 3 Diploma Full Online
Course Now
£1900 + VAT


Paypal Logo

Ten Monthly Payments of £190 + VAT


Paypal Logo

Other Payment Options

You can also make your payment by BACS transfer, please contact us if you’d prefer to use this option.

ELCAS Funding

​Our C&G 2365 Level 3 Diploma in Electrical Installations is approved for ELCAS funding. Under the scheme members of the Armed Forces can receive financial support to contribute towards their higher-level learning.

Other Payment Options

You can also make your payment by BACS transfer, please contact us if you’d prefer to use this option.

C&G 2365 Units Overview

Unit 301: Understand the Fundamental Principles and Requirements of the Environmental Technology Systems Course Overview:

The aim of this unit is to enable the candidate to know the fundamental working principles along with regulatory requirements relating to renewable energy. Be able to distinguish the potential type of building features that will meet the requirements to install renewable energy water conservation along with typical advantages and disadvantages.

Learning Outcome 1 – Know the Fundamental Working Principles of Micro-renewable Energy and Water Conservation Technologies
Learning Outcome 2 – Know the Fundamental Requirements of Building Location/Building Features for the Potential to Install Micro-renewable Energy and Water Conservation Systems To Exist
Learning Outcome 3 – Know the Fundamental Regulatory Requirements Relating to Micro-renewable Energy and Water Conservation Technologies
Learning Outcome 4 – Know the Typical Advantages and Disadvantages Associated With Micro-renewable Energy and Water Conservation Technologies

Online Exam (301)

Unit 302: Principles of Electrical Science Course Overview:

The aim of this unit is to enable the candidate to understand the principles of electrical science related to AC theory, machines, devices, and systems. This understanding is applied when designing wiring systems for clients and fault diagnosis.

Learning Outcome 1 – Understand Electrical Supply Systems
Learning Outcome 2 – Understand How Different Electrical Properties Can Affect Electrical Circuits, Systems and Equipment
Learning Outcome 3 – Understand The Operating Principles and Applications of DC Machines and AC Motors
Learning Outcome 4 – Understand The Operating Principles of Electrical Components
Learning Outcome 5 – Understand The Principles and Applications of Electrical Lighting Systems
Learning Outcome 6 – Understand The Principles and Applications of Electrical Heating

Final Written Exam & Small Practical Exam (612)

Unit 303: Electrical Installations: Fault Diagnosis and Rectification Course Overview:

This unit is designed to enable learners to understand how to carry out fault diagnosis and rectification of complex electrical systems safely and in accordance with regulatory requirements, with an emphasis on period inspection scenarios. Learners will also develop the skills to apply their understanding of fault diagnosis in simulated environments.

Learning Outcome 1 – Understand the Health & Safety Requirements Relevant to Fault Diagnosis
Learning Outcome 2 – Understand the Importance of Reporting and Communication in Fault Diagnosis
Learning Outcome 3 – Understand the Nature and Characteristics of Electrical Faults
Learning Outcome 4 – Understand the Fault Diagnosis Procedure
Learning Outcome 5 – Understand the Procedures and Techniques for Correcting Electrical Faults
Learning Outcome 6 – Perform Fault Diagnosis

Practical Exam (613)
Online Exam (623)

Unit 304: Electrical Installations: Inspection, Testing, and Commissioning Course Overview:

The unit is designed to enable learners to understand how to carry out the inspection and testing of complex electrical systems safely and in accordance with regulatory requirements. Learners will also develop the skills to apply their understanding in simulated environments.

Learning Outcome 1 – Understand the Requirements for Completing the Safe Isolation of Electrical Circuits and Installations
Learning Outcome 2 – Understand the Requirements for Initial Verification of Electrical Installations
Learning Outcome 3 – Understand the Requirements for Completing the Inspection of Electrical Installations Prior To Their Being Placed Into Service
Learning Outcome 4 – Understand the Requirements for the Safe Testing and Commissioning of Electrical Installations
Learning Outcome 5 – Understand the Requirements for Testing Before Circuits Are Energised
Learning Outcome 6 – Understand the Requirements for Testing Energised Installations
Learning Outcome 7 – Understand the Requirements for the Completion of Electrical Installation Certificates and Associated Documentation
Learning Outcome 8 – Be Able to Confirm the Safety of the System and Equipment Prior to Completion of Inspection, Testing, and Commissioning
Learning Outcome 9 – Be Able to Carry Out Inspection of Electrical Installations Prior To Them Being Placed Into Service
Learning Outcome 10 – Be Able to Test Electrical Installations Prior To Them Being Placed Into Service
Learning Outcome 11 – Be Able to Commission Electrical Systems and Equipment

Practical Exam & Written Paper (614)
Online Exam (624)

Unit 305: Electrical Systems Design Course Overview:

This unit provides the learner with the understanding of electrical systems design using design techniques and determining system requirements. It also provides learners with the understanding needed to plan work programmes and contractual implications of electrical design.

Learning Outcome 1 – Understand How to Prepare for the Installation of Wiring Systems
Learning Outcome 2 – Understand the Applications of Wiring Systems
Learning Outcome 3 – Understand the Practices and Procedures for Carrying Out Electrical Work
Learning Outcome 4 – Understand the Characteristics and Applications of Supply Systems and Consumer’s Equipment
Learning Outcome 5 – Understand Earthing and Protection
Learning Outcome 6 – Understand Protection Against Overcurrent
Learning Outcome 7 – Understand Electrical Systems and Circuits
Learning Outcome 8 – Understand the Electrical Design Procedure

Practical Exam & Written Paper (615)
Online Exam (625)

Unit 308: Career Awareness in Building Services Engineering Course Overview:

This unit will introduce learners to the concept of planning for their own career development and setting goals to help realise plans. Learners will investigate the different crafts that makeup Building Services Engineering.

The unit is designed to demonstrate to learners that there are many optional career pathways including becoming highly skilled in their own craft or exploring supervisory responsibilities.

Learning Outcome 1 – Understand How to Plan for Careers in Building Services Engineering
Learning Outcome 2 – Understand the Requirements to Become a Qualified Operative in Building Services Engineering

Written Assignment (308)

Unit 201: Health and Safety in Building Services Engineering Course Overview:

PLEASE NOTE: Unit 201 is also required for completion of this qualification but the XS Training 2365 Level 3 Online course does not include this as it is included in the 2365 Level 2 Diploma. This can be purchased separately if required. 

This unit provides learners with the essential health and safety knowledge and skills to demonstrate best practice in a business services engineering environment or sector. The unit provides learners with an awareness of relevant legislation and should underpin all business services engineering activities learners take part in.

Learning Outcome 1 – Health and Safety Legislation in Electrical Installations
Learning Outcome 2 – Hazardous Situations in Electrical Installations Part 1
Learning Outcome 3 – Hazardous Situations in Electrical Installations Part 2
Learning Outcome 4 – Gases and Heat Producing Equipment in Electrical Installations
Learning Outcome 5 – Access Equipment, Confined Spaces and Applying Safe Working Practices
End of Unit Exam

Buy The C&G 2365 Unit 201 Online Course Only Now
£250 + VAT


Paypal Logo

Two Monthly Payments of £125 + VAT


Paypal Logo

Start Your C&G 2365 Level 3 Diploma in Electrical Installations TODAY

Pin It on Pinterest